DEPARTMENT OF INFORMATION TECHNOLOGY
ICT50220 Diploma of Information Technology
Assessment
ICTNWK562 Configure Internet Gateways
Assessment Task 4
2022
Course: ICT50220 Diploma of Information Technology
Unit of competency: ICTNWK562 Configure Internet Gateways
Prepared by: Curriculum Unit, Melbourne Polytechnic
Document creation date: Nov. 2022
Document review date: Nov. 2022
Version: 1.0
© Melbourne Polytechnic 2022
National Provider no. 3075
Acknowledgments
ICT - Information and Communications Technology Training Package . National training packages attributed as ‘© Commonwealth of Australia 2013’
and Victorian Registration & Qualifications Authority (VRQA) training packages are attributed as ‘© State of Victoria (Department of Education and Training) 2018’. Training packages are copied and communicated under Creative Commons Attribution-Non Derivative 3.0 Australia (CC BY-ND 3.0 AUS) license.
For information regarding material in this document, contact:
Melbourne Polytechnic
Assessment Task 4: Project
Course code and name ICT50120 Diploma of Information Technology
Unit code and name ICTNWK562 Configure Internet Gateways
Due date ….. / ….. / …… (See on Moodle)
Resources required **3;Ruijie Network Device Simulator RGOSV1.0 To Examination
VMware Workstation Pro
SecureCRT
Speed Test Manager
Acunetix
RG Network Equipment Technical Documentations
Access to computer and internet
Decision making rules To achieve an overall satisfactory result for this assessment task:
All questions must be answered satisfactorily
Learners must achieve a satisfactory result for each item in the Assessment Checklist.
Learner Instructions This is a scenario based lab project assessment composed of practical tasks and written questions. There are 4 parts to this task:
Part 1: Identify client requirements and network equipment
Part 2: Security Features and Security Plan
Part 3: Install and Configure a Gateway
Part 4: Configure and Test Nodes
For this task you will:
Complete it individually.
Write answers to all questions
Complete it in class at a time determined by your assessor.
Have time to read and review the assessment task in class.
You must submit your assessment electronically via Moodle and use the following naming convention: “Student ID_Student Name_ Assessment Task 4: Lab Project - Configure an internet gateway”
Example:
“s123456_Sathish_ Assessment Task 4: Configure an internet gateway.pkt”
“s123456_Sathish_ Assessment Task 4: Configure an internet gateway.docx”
You must agree (by clicking on the ‘I confirm radio button) with the assessment submission terms and conditions in Melbourne Polytechnic Moodle prior to the submission
Scenario
ABC is a start-up consulting company that has two departments in different floors. Each of the department has 20 employees. In order to conduct business well, an internal web server is needed to provide services to the employees and customers. It is required that all the employees can have access to the internet in the company. The bandwidth of the company's internal LAN is required to reach 1Gbps and the bandwidth of the internet is required to reach 10Mbps.
Your Role
You work as a network engineer for ABC company and you have been given the task to design and build a safe, reliable, scalable and efficient network for the company.
Part 1– Prepare to configure internet gateways
Step 1: Confirm work brief and tasks according to organisational policies and procedures.
1 What is your work brief and tasks according to the above scenario with reference to ABC Company’s Network Engineering Project Management Policies and Procedures? [40-60 words]
Answer Satisfactory Unsatisfactory
work brief and tasks [40-60 words]
2 How will you conduct your work and tasks? Describe the work procedures. [40-60 words]
Answer Satisfactory Unsatisfactory
work procedures[40-60 words]
You need to identify the client's requirements and fill in the following section according to the above scenario and confirm that with your ABC manager. The key points to be confirmed are as follows:
Advanced network structure is adopted to meet the needs of information transmission, storage and processing.
Appropriate security measures are taken for the network.
Proper network topology is planned and adopted.
Network interconnection testing requirements should be satisfied.
Other requirements should be considered and confirmed.
Validation Checklist
Project Network Design and Implementation for ABC Company
Network Topology Type
Security Measures
Network Topology Planning
Any Other Requirements
Start Date
Due Date
Project Manager
ABC Manger (signature)
Step 2: Assess system architecture according to work brief.
3 Assess the system architecture that you’ve confirmed with your client from the aspects of network security, speed and functions. [45-** words]
Answer Satisfactory Unsatisfactory
1 Network security [15-30 words]
Answer Satisfactory Unsatisfactory
2 Network speed [15-30 words] □ □
Answer Satisfactory Unsatisfactory
3 Network functions [15-30 words] □ □
Step 3: Select and source required configuration hardware, software and tools.
The hardware and software components that are required for building ABC network are listed as following:
Hardware Components
Equipment Type Quantity
Router RG-RSR20-X SERIES 1
Switch (Layer 3) RG-S5750-28GT4XS-H 1
Switch (Layer 2) RG-S2910-24GT4XS-E 2
Gateway RG-EG2000F 1
FIREWALL RG-WALL 1600-S3100 1
SERVER UDS-Serv 4000G20 1
Software Components
Name Version Quantity
Vmware Workstation Pro Vmware Workstation Pro 16 1
SecureCRT SecureCRT.8.5.4 1
Ruijie Network Device Simulator RGOSV 1.0 To Examination 1
Speed Test Manager V3.1.0 1
Acunetix V12 1
You need to install the software components and use Ruijie Network Device Simulator to build a simulated network according to the following topology diagram and indicate the type of each device in the topology, then install the hardware components according to the simulated network. For simplicity, only 5 PCs are required to be connected and configured in the simulated network.
4 Install the software component and build a simulated network according to the above topology and indicate the type of each device in the topology. Paste the screenshot in the following.
Answer Satisfactory Unsatisfactory
Screenshot of the simulated network with the indication of each device type
Step 4: Verify equipment specifications and confirm component serviceability.
You need to verify the availability and reliability of the above equipment and provide the following screenshots:
The availability and reliability of the equipment
Euipment Screenshots of equipment startup Screenshots of equipment self-checking
Switch (Layer 3)
Switch (Layer 2)
Gateway（R1）
Firewall
Server
Part 2– Determine security requirements
Step 1: Analyse existing ISP security features.
China Telecom, as one of the biggest ISP in China, provide the internet services for ABC company. You need to analyse the security features of China Telecom and assess its ability to prevent data interception, data corruption and data falsification.
1 Analyse security features of China Telecom and assess its ability to prevent data interception, data corruption and data falsification. [60–100 words]
Answer Satisfactory Unsatisfactory
1 Security features of China Telecom [30–50 words]
Answer Satisfactory Unsatisfactory
2 Assess China Telecom’s ability to prevent data interception, data corruption and data falsification [30–50 words]
Step 2: Conduct required ISP speed test and identify system vulnerabilities.
2 Using Speed Test Manager and Acunetix to conduct the speed test and system vulnerability scanning for China Telecom. Provide the screenshots of the results.
Answer Satisfactory Unsatisfactory
1 Speed test screenshot
Answer Satisfactory Unsatisfactory
2 System vulnerability scanning screenshot
Step 3: Analyse internet gateway options.
3 Analyse the internet gateway options and explain the features of Static Network Address Translation (SNAT), Dynamic Network Address Translation (DNAT) and Port Address Translation (PAT).
Answer Satisfactory Unsatisfactory
1 Static NAT [30–50 words]
Answer Satisfactory Unsatisfactory
2 Dynamic NAT [30–50 words] □ □
Answer Satisfactory Unsatisfactory
3 PAT [30–50 words] □ □
Step 4: Select required internet gateway option and create security plan according to analysis findings.
4 Which internet gateway options will you select according to your analysis findings.
Answer Satisfactory Unsatisfactory
1 Select required internet gateway options [2–10 words]
5 Create a security plan according to analysis findings and have a description. [40–50 words]
Answer Satisfactory Unsatisfactory
1 Security Plan [40–50 words]
6 Report the potential security problems and attacks to the clients. [40–60 words]
Answer Satisfactory Unsatisfactory
1 Potential Security Problems [20-30 words]
Answer Satisfactory Unsatisfactory
2 Potential Attacks [20-30 words]
Part 3 – Install Internet Gateways
Please refer to the attached RG Network Equipment Technical Documentations and complete the gateway installation and configuration.
Step 1: Identify required internet gateway installation method according to security plan and work brief.
The IP address table is as follows. You need to change the following X into your own ID number.
Device Interface / VLAN IP Address
PC1_1 G 0/0 VLAN 10 192.168.X.1/24
PC1_2 G 0/1 VLAN 10 192.168.X.2/24
PC1_20 G 0/2 VLAN 10 192.168.X.3/24
PC2_1 G 0/1 VLAN 20 192.168.X+1.1/24
PC2_2 G 0/2 VLAN 20 192.168.X+1.2/24
SERVER Eth 0 172.16.1.1/24
SWA VLAN10 192.168.X.254/24
VLAN 20 192.168.X+1.254/24
G 0/2 200.200.200.201/30
Gateway(R1) G 0/1 200.200.200.2/30
G 0/2 200.200.201.1/30
Firewall G 0/0 218.122.12.1/24
G 0/1 200.200.200.1/30
G 0/2 172.16.1.2/24
Internet(R2) G 0/0 218.122.12.2/24
218.122.12.3/24
(Alternate test address)
1 Describe the internet gateway installation method according to security plan and work brief.[30-40]
Answer Satisfactory Unsatisfactory
Internet gateway installation method [30-40]
Step 2: Configure internet gateways according to technical guidelines.
2 Configure the firewall to make the server access the Internet through SNAT, and provide a screenshot.
Answer Satisfactory Unsatisfactory
Screenshot of SNAT on the firewall
3 Configure the router to make the PCs access the Internet through PAT, and provide a screenshot.
Answer Satisfactory Unsatisfactory
Screenshot of PAT on the router
Step 3: Test internet gateway, and rectify and report any network issues.
4 When you were doing the testing, you found that the PC1_1 could not ping the PC2_1 successfully. Please analyze the possible causes (at least 2 points) and make necessary changes for the network. Provide the screenshot of the correct result. [40-60 words]
Answer Satisfactory Unsatisfactory
1 Analyze the Possible Causes [40-60 words]
Answer Satisfactory Unsatisfactory
2 Screenshot of the Correct Result
5 During the testing, you found that PC1_1 cannot access Server although the gateway address was configured correctly. Please analyze the possible causes (at least 2 points) and make necessary changes for the network. Provide the screenshot of the correct result. [40-60 words]
Answer Satisfactory Unsatisfactory
1 Analyze the Possible Causes [40-60 words]
Answer Satisfactory Unsatisfactory
2 Screenshot of the Correct Result
6 During the testing, you found PC1_1 cannot ping Firewall’s G0/1 successfully. Please analyze the possible causes (at least 2 points) and make necessary changes for the network. Provide the screenshot of the correct result. [40-60 words]
Answer Satisfactory Unsatisfactory
1 Analyze the Possible Causes [40-60 words]
Answer Satisfactory Unsatisfactory
2 Screenshot of the Correct Result
Part 4 – Connect nodes to internet gateways
Please refer to the attached RG Network Equipment Technical Documentations and complete the following configuration and testing.
Step 1: Establish prerequisites and confirm gateway connection to network router.
1 Describe the prerequisites that you established.
Answer Satisfactory Unsatisfactory
1 Prerequisites [30-50 words]
2 Confirm gateway connection to network router and provide the screenshot.
Answer Satisfactory Unsatisfactory
1 screenshot
Step 2: Assign nodes to logical gateway as required by network architecture.
Provide the screenshots of IP configurations of the gateway, switch (layer 3), Firewall, Server, PC1_1, PC1_2, PC1_20, PC2_1,PC2_2.
3 Provide the screenshots of IP configurations of the following devices.
Answer Satisfactory Unsatisfactory
1. Gateway
Answer Satisfactory Unsatisfactory
2. Switch (Layer 3)
Answer Satisfactory Unsatisfactory
3 Firewall
Answer Satisfactory Unsatisfactory
4 Server
Answer Satisfactory Unsatisfactory
5 PC1_1
Answer Satisfactory Unsatisfactory
6 PC1_2
Answer Satisfactory Unsatisfactory
7 PC1_20
Answer Satisfactory Unsatisfactory
8 PC2_1
Answer Satisfactory Unsatisfactory
9 PC2_2
Step 3: Determine connection type and configure firewalls.
Provide screenshots that show the configuration of the firewalls.
4 Provide the screenshots of the completed configuration of the firewall.
Answer Satisfactory Unsatisfactory
Screenshot of firewall
Step 4: Test and confirm internet gateway node connection.
Provide the screenshots of the following device connectivity test.
5 Test the connectivity of the following devices using ping command and provide the screenshots.
Answer Satisfactory Unsatisfactory
1. From PC1_1 to Internet
Answer Satisfactory Unsatisfactory
2. From PC1_2 to Internet
Answer Satisfactory Unsatisfactory
3 From PC1_20 to Internet
Answer Satisfactory Unsatisfactory
4 From PC2_1 to Internet
Answer Satisfactory Unsatisfactory
5 From PC2_2 to Internet
Answer Satisfactory Unsatisfactory
6 From PC1_1 to PC1_2
Answer Satisfactory Unsatisfactory
7 From PC1_20 to PC2_2
Answer Satisfactory Unsatisfactory
8 From PC1_1 to Server
Answer Satisfactory Unsatisfactory
9 From PC2_2 to Server
Answer Satisfactory Unsatisfactory
10 From R2 (218.122.12.2) to Server
Answer Satisfactory Unsatisfactory
11 From R2 (218.122.12.3) to Server
Student Declaration
Please read, tick and sign below
I declare that the attached assessment I have submitted is my own original work and any contributions from and references to other authors are clearly acknowledged and noted.
This document has been created for the purpose of this assessment only and has not been submitted as another form of assessment at Melbourne Polytechnic or any other tertiary institute.
I have retained a copy of this work for my reference in the event that this application is lost or damaged.
I give permission for Melbourne Polytechnic to keep, make copies of and communicate my work for the purpose of investigating plagiarism and/or review by internal and external assessors.
I understand that plagiarism is the act of using another person’s idea or work and presenting it as my own. This is a serious offence and I will accept that penalties will be imposed on me should I breach Melbourne Polytechnic’s plagiarism policy.
Student Signature X Date
Please note that your assignment will not be accepted unless you have:
Completed all sections of the assignment
Acknowledged all sources of other people’s contributions including references and Students’ names for group work assessments
Completed all areas of this Student assignment cover sheet.
Attachment
請加QQ：99515681 郵箱：99515681@qq.com WX：codinghelp
